One stove that runs on whatever fuel is on the shelf.
In camping stoves the volume sits in one place: a single-burner tabletop unit around EUR 30-45 that takes both a butane cartridge and a propane cylinder. Dual-fuel is not a premium feature in this category, it is the reason a buyer picks one listing over another in a shop where only one fuel type is stocked.
What actually decides this purchase.
8,000 BTU single burner on butane or propane, with EN 417 connection, piezo ignition and a moulded carry case.
Dual fuel is the whole selling point
Butane cartridges are cheap and widely stocked in Europe; propane cylinders work below freezing. A stove that accepts both removes the buyer's biggest hesitation, which is arriving at a campsite with the wrong canister.
Cold-weather behaviour
Butane loses pressure near freezing, propane does not. For shoulder-season and emergency use, the propane path is what keeps the product usable when it matters most.
Ignition that works with gloves on
Piezo ignition integrated into the control knob, with a flame that can be turned down to a genuine simmer rather than two settings: off and blowtorch.
Packs into its own case
Around 3.3 lb and supplied with a moulded carry case, so it fits a weekend kit or a car boot. Weight and pack size decide which listing wins the comparison table.
Specifications you define per order.
Final rated values are confirmed in the technical file for your selected model. The table below is the configurable range our manufacturing partner supports, not a guarantee for every variant.
| Specification | Configurable range / options | Buyer note |
|---|---|---|
| Fuel | Butane cartridge + propane cylinder | Adapter included |
| Burner output | 8,000 BTU (approx. 2.3 kW) | Confirms to EN 521 test scope |
| Burners | Single | Double available separately |
| Ignition | Piezo, integrated in knob | No matches required |
| Connection | EN 417 cartridge interface | Standard European fit |
| Safety | Over-pressure release, flame failure protection | Confirm per model |
| Body | Stainless steel + steel frame | Wind shield ring included |
| Weight | approx. 1.5 kg / 3.3 lb | Packed, without fuel |
| Accessories | Carry case, wind shield, grill plate option | Grill plate for the EU market |
| Compliance | GAR (EU) 2016/426, EN 521 | Notified-body certificate required |
A low-ticket, high-frequency category.
The stove is a one-off purchase; the fuel is the repeat. That is why retail buyers care more about canister compatibility and case quality than about BTU bragging rights. A stove that only takes one cartridge type loses the reorder to the one that takes two.
Ask for the cost model for your market8,000 BTU
About 2.3 kW of cooking power
~3 min
Typical time to boil 1 L
2 fuels
Butane and propane
1.5 kg
Packed weight, no fuel
Yongkang stove cluster, export-ready route.
Volume production comes from a Yongkang gas-appliance factory with CE and UKCA certification and existing dual-fuel tooling, including a dual-use butane stove that has sold in the thousands on its domestic platform. Because that factory does not accept direct export orders, export shipments are routed through a partner factory in the same cluster that holds ISO 9001, CE and LFGB and explicitly supports export orders.
Questions buyers ask before the first order.
Gas appliances fall under the Gas Appliances Regulation (EU) 2016/426, supported by EN 521 for portable LPG appliances. A notified-body certificate is required, and it is the first document to request from any supplier. CE marking alone is not evidence of compliance.
On propane, yes. Butane loses vapour pressure as temperature drops, so a butane-only stove effectively stops working near 0°C. Dual fuel is what makes the product usable in winter and in emergency kits.
1,000 units for private label. Stock models can be quoted at lower volumes for sampling and market testing.
The stove ships with the EN 417 interface, and canisters are normally sourced and filled locally to avoid pressurised-goods transport restrictions. We can quote the stove and accessories together, but fuel is handled in-market.
Buyers usually quote these together.
Combining categories in one shipment reduces freight and tooling cost per unit.
Send us the spec you need quoted.
Tell us the target retail price, destination market and volume. We reply with the matching configuration, the certification plan and a sample timeline — usually within two working days.